Hefei Growking Optoelectronic Technology Co.,Ltd
Home /

Color sorter

/

The application scope and precautions of belt type color sorter

The application scope and precautions of belt type color sorter

2022-Aug-19

We all know that the belt color sorter has a wide range of options, including plastic, ore, melon seeds, garlic, pepper, beans, peanuts, coffee beans, tea, fish and shrimp, pepper and pepper, dehydrated vegetables, nuts, corn, raisins , preserved fruit, etc. At present, most CCD belt color sorters have 2048 full-color line scanning technology, an algorithm combining color and space, and provide "color selection + shape selection" function for different materials. Color selection is very powerful.
Track Color Sorter
In order to ensure the working quality and life of the color sorter, it is recommended to start the machine 30 minutes in advance to warm up in winter, and the working environment should be kept above +5℃, especially in the northern region, pay attention to the working environment.
 
In places with high humidity, it is recommended that customers install two moisture filters. It can be drained at least once every two hours according to the site conditions, otherwise the water entering the machine will shorten the life of the machine. For each filter in the air circuit (including the inside of the machine), check the drainage condition in time, and replace the filter element from time to time.
 
Demon reminds the following points when using the color sorter in winter:
 
(1) The weather is cold in winter, and each ball valve should be opened slowly to prevent the high-speed airflow from freezing the pipeline.
 
(2) At the end of each shift, the residual gas and moisture in the equipment are strictly emptied according to the requirements to prevent freezing.
 
(3) Whether there is blockage in the gas supply pipeline can be judged by referring to the following methods:
 
During the working process of the color sorter, when the air compressor starts up again, pay attention to whether the air inlet pressure gauge on the side of the color sorter is the same as the air pressure value indicated by the air compressor. If it is lower than the value of the pressure gauge of the air compressor, it means that the pipeline is blocked (dirty blockage or ice blockage), please clean the pipeline and each filter element.
 
When cleaning or changing each part of the machine, please turn off the power through the switch key, and then put the air switch on the side of the main unit to the OFF position before cleaning or changing. Please do not touch the CCD camera lens, if the setting and adjustment are incorrect, it will affect the color selection effect.

   
Have a question? You can call us or email us by sending a message below.